CGI Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

CGI Shingle, Tile & Metal Roofing in Miami Beach: What to Know First

As an independent CGI service provider, we repair and replace shingle, tile, and metal roofing on Miami Beach homes with CGI products in place, and most jobs are completed within one to three days from the initial call. Pricing runs from about $300 for a targeted repair up to full replacement work that’s quoted line-by-line before we ever pick up a tool. If you own a CGI roof in Miami Beach and need someone who actually knows the product line, call us at (863) 656-0462 for a free estimate. Ed Winslow grew up in Miami and has worked up and down Miami Beach for years, from older condos near the Faena District to single-family homes just off the boulevard. We’re not a manufacturer hotline and we’re not a call center. We’re the local crew that shows up, diagnoses the actual problem, and fixes it.

Call (863) 656-0462

How CGI Products Fail - and How We Fix Them

CGI builds a solid roof, but Miami Beach’s salt air, afternoon thunderstorms, and hurricane-season wind loads create failure patterns we see again and again. Here’s what actually goes wrong:

• CGI Sentinel Shingle erosion at the overlap seams. The asphalt granular layer starts shedding after seven to ten years of salt spray and UV exposure, especially on roofs facing the Atlantic. The shingles look intact from the street, but the fiberglass mat is drinking water at the seams. We catch it by walking the roof and checking granule loss at the overlap line, then replace the affected courses before decking damage spreads.
• CGI Traditions tile cracking at the nail line. Concrete tile expands and contracts more than the underlayment beneath it. On Miami Beach homes with original CGI Traditions tile from the mid-2000s, we find hairline cracks running through the nail holes on south-facing slopes. The tile looks fine until you lift it and see the fracture. We pull cracked tiles, inspect the underlayment, and re-set replacements using the same profile so the roof stays watertight without a visible patch.
• CGI standing seam metal panel oil-canning and fastener backout. Metal roofs in Miami Beach take a beating from wind-driven rain and thermal cycling. On CGI metal systems, we commonly see fasteners that have worked loose over time, which lets panels flutter in a storm and eventually tear at the seam. We re-torque or replace fasteners, reset panels, and check the clip system underneath so the next hurricane doesn’t peel the roof open.
• Flashing failures where CGI shingle or tile meets a flat roof section. Miami Beach has plenty of homes with mixed roof profiles, and the transition is where water gets in. The flashing detail between the pitched CGI roof and a flat membrane section corrodes or separates, and water travels horizontally into the soffit. We rebuild the transition with proper flashing and sealant rated for coastal exposure.
• Underlayment breakdown under CGI tile that looks perfectly fine from below. This is the one that surprises people. The tile can have twenty years of life left while the felt or synthetic underlayment beneath it is crumbling. We find this on Miami Beach homes where the original underlayment was installed before modern high-temp synthetics became standard. When we do a tile repair, we always inspect the underlayment and tell you honestly whether the tiles need resetting or just the layer beneath them replaced.

One thing we won’t do is push an OEM part where an equivalent aftermarket option makes more sense. For CGI shingle repairs, the color match matters more than the brand stamp on the wrapper. For tile, we source matching profiles from local Miami Beach suppliers, and for metal, we match gauge and finish rather than paying a premium for a label. If your warranty requires OEM, we’ll tell you that too, so you can decide with the facts in front of you. My name is on every job we do. That keeps me honest.

Our CGI Shingle, Tile & Metal Roofing Process

Here’s how a CGI roof job goes when you call Winslow Windows & Doors:

1. 1
   You call, a person answers. Not a menu. Not a callback request. One of our people picks up, asks where you are in Miami Beach, and schedules a visit at a time that works for you. No trip charge inside our home county.
2. 2
   We walk the roof and show you what we see. We take photos, point out the specific failure, and explain whether it’s a repair or a replacement situation. If it’s a repair, we show you why it happened and how we’ll prevent it from recurring.
3. 3
   You get a written line-by-line estimate. Every labor hour, every material, every permit fee if one’s required. We don’t do open-ended pricing, and we don’t surprise you with a change order halfway through.
4. 4
   We do the work with background-checked, uniformed technicians. Your roof is protected during the job, and we keep the work area clean. For tile jobs, we stage materials on plywood, not directly on your tiles. For metal, we match existing panel profiles so the repair disappears into the roof.
5. 5
   We test before we leave. Water test where appropriate, fastener torque check on metal, sealant inspection with a flashlight on flashing details. If it’s not right, we fix it then, not next week.
6. 6
   The job is covered by the 36500-Day Done Right Promise. If it’s not done right, we make it right. That’s a hundred years of accountability, and we put it in writing on every invoice.

What CGI Shingle, Tile & Metal Roofing Costs in Miami Beach

Here’s what CGI repair and replacement actually costs on Miami Beach right now:

• CGI shingle repair (small section): $300-$700 depending on the number of courses and the pitch of your roof.
• CGI tile repair (cracked or displaced tiles): $400-$900 including matching tile, underlayment spot repair, and re-setting.
• CGI metal roof repair (fastener backout, panel reset): $500-$1,200 depending on the panel count and whether we’re replacing clips or just re-torquing.
• CGI shingle full replacement on an average Miami Beach single-family home: $9,000-$16,000 depending on square footage, tear-off requirements, and underlayment condition.
• CGI tile full replacement: $18,000-$35,000. Tile is heavier, slower to install, and requires more labor than any other material.
• CGI metal full replacement: $15,000-$28,000 depending on panel profile and whether we’re keeping or replacing the existing framing.

What moves the price in Miami Beach: roof pitch (steeper roofs cost more per square), roof height (two-story homes need more staging time), and whether your existing underlayment meets current code. We always quote the underlayment separately from the visible roof material so you can see exactly what you’re paying for. Call (863) 656-0462 for a free estimate and we’ll walk you through the numbers specific to your house.

Why Miami Beach Homeowners Call Winslow Windows & Doors for CGI Work

We’ve been in business since 2011, and Ed Winslow’s name is on the door and on every job. That’s not a slogan, it’s a fact. We’re a local, owner-operated company with a published address and license number, not a national chain. When you call at 2 a.m. during a storm, a live person answers. Every technician who comes to your Miami Beach home is background-checked and in uniform, so you know exactly who’s at your door before the truck pulls up. And because we’re authorized installers for eight premium brands, including PGT, CWS, ES Windows, and ECO Window Systems, we understand how your CGI roof works with the rest of your home’s exterior. We’re the one down the road, and we plan on being here for the next hundred years.

FAQs