Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
PGTCGI
Before
After
Before
After
Before
AfterVinyl Impact Windows in Miami Beach, FL | Winslow Windows & Doors
Vinyl impact windows are one of the most practical upgrades a Miami Beach homeowner can make. They combine the storm protection Miami-Dade County demands with a frame material that never needs painting, never corrodes in salt air, and never rots in our humidity. At Winslow Windows & Doors, we install vinyl impact windows across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass configurations, and every opening is set level, plumb, and square per HVHZ installation standards. If you’re researching this product for a condo retrofit, a single-family home, or a full building replacement, call (863) 656-0462 to talk through your project and get a written line-item quote.
Product Overview - Vinyl Impact Windows
Vinyl impact windows start with the same laminated impact glass found in our aluminum lines, but wrap it in a multi-chambered vinyl frame that handles Florida’s coastal environment with very little upkeep. The result is a window profile that suits nearly any architectural style in Miami Beach, from 1950s MiMo flats along Normandy Isle to newer Mediterranean builds in North Beach. Laminated impact glass in a low-maintenance vinyl frame, insulated and Low-E-capable, and available across every operable style in this collection.
The frame itself is extruded with internal chambers that act as thermal breaks and add structural rigidity. That rigidity matters when a window is carrying laminated glass, which is notably heavier than standard annealed glass. Vinyl profiles also have an advantage in coastal Miami Beach: the material is naturally resistant to the salt spray that eats aluminum finishes over time. Couple that with a fused or mechanically joined corner system depending on the line, and you get a window that holds its shape through storm cycles without the corrosion headaches.
Operable styles in this impact series include single hung, horizontal roller, casement, awning, and picture configurations, so sightlines and ventilation stay flexible for bedroom egress, living-room ocean views, or kitchen pass-throughs. If your Miami Beach project falls within a Historic District review area, we can help you select a finish and mullion profile that works with the board’s requirements.
Technical Specifications
- Frame material: Multi-chambered vinyl, welded or mechanically joined per product line
- Impact glazing: Laminated impact glass with PVB interlayer, available as clear or tinted
- Insulated glazing: Low-E insulated glass units available across operable styles
- Finish options: White, Almond, Bronze, Black, Tan
- Operable styles: Single hung, horizontal roller, casement, awning, picture, and custom configurations
- Design pressure: Matched to your Miami Beach wind zone, up to +/-100, never higher
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers issued per configuration and included with your permit submittal
- Standards context: Engineered to Florida Building Code High-Velocity Hurricane Zone (HVHZ) requirements; tested under the TAS 201, TAS 202, and TAS 203 protocol family
Hurricane & Compliance Performance
Laminated Impact Glass - Two panes of glass bonded with a PVB (polyvinyl butyral) interlayer. When debris strikes, the glass may crack but the interlayer holds the pane in the frame, keeping wind, rain, and pressure out of the home. This is the core of what makes a window “impact-rated” in Florida.
Miami-Dade NOA / Florida Product Approval - Every configuration we quote carries the appropriate Notice of Acceptance or Florida Product Approval number. Each size, style, and glass combination earns its own approval listing, which means the number on our quote is the number your Miami Beach permit reviewer sees. (863) 656-0462 is the fastest way to get the right submittal package for your project.
FBC High-Velocity Hurricane Zone Compliance - The product line is engineered to Florida Building Code HVHZ requirements. Miami Beach sits squarely inside the HVHZ map, so this isn’t an optional add-on; it’s the minimum bar for permitted window work here. We don’t install anything that falls below it.
TAS 201 / TAS 202 / TAS 203 Testing Context - HVHZ-rated products are evaluated under a testing family that includes TAS 201 (large-missile impact), TAS 202 (cyclic wind-pressure loading), and TAS 203 (forced-entry resistance). These tests simulate the repeated pressurization cycles of a hurricane passing over, not just a single gust. A product that passes them has earned its Miami Beach permit path.
Design Pressure for Your Wind Zone - Design pressures are matched to the specific wind zone where the window will be installed, up to +/-100 pounds per square foot, never higher. We don’t overspec just to sound impressive; we specify what engineering calls for at your address. Higher DP ratings beyond your zone add cost without adding protection.
Energy Performance Options - Low-E and insulated glass configurations are available on this product. For Miami Beach sun exposure, tinted Low-E insulated units reduce solar heat gain through east- and west-facing openings and make a measurable difference in afternoon cooling load. Clear glass remains the right choice where maximum brightness matters more.
Color & Glass Options
The finish palette for these vinyl impact windows runs White, Almond, Bronze, Black, and Tan. In Miami Beach, the right choice usually depends on the building’s era and material palette. White and Almond stay crisp on white stucco and Art Deco buildings south of 41st Street. Bronze and Black are strong on contemporary homes with darker trim or metal detailing, and they carry a slight modern edge on a concrete-and-glass build. Tan bridges the gap on beige stucco or Spanish Mediterranean elevations across North Beach.
Glass selection divides into four paths: clear laminated impact glass for maximum transparency, tinted laminated for glare and heat reduction, Low-E insulated for year-round energy performance, or Low-E tinted insulated where sun exposure is at its worst. For a living room facing the bay or an unshaded western exposure, we typically recommend a tinted Low-E insulated unit. For a shady north-facing bedroom, clear laminated keeps the view honest. The glass decision changes the quote, so we help you model the tradeoffs before locking the order.
Installation by Winslow Windows & Doors in Miami Beach
An impact window only performs as well as its installation. The NOA approval on the product assumes the window is installed to the same standard. That’s why Winslow Windows & Doors follows AAMA 2400/2410 practice on every opening in Miami Beach, which covers the removal of the existing window and the installation of the new one.
Our process starts with a pre-install inspection of the opening. We’re looking for rotted buck framing, out-of-square openings, and previous water intrusion around the sill. In older Miami Beach buildings, especially mid-century construction, you’ll often find wood bucks that have softened from years of wind-driven rain. That has to be addressed before the new window goes in, or the best product in the world will leak.
During setting, the window goes in level, plumb, and square, not just into the opening. We shim to true and fasten per the manufacturer’s approved anchoring pattern for your specific wind zone. The perimeter is sealed with AAMA 812 low-expansion foam and finished with an appropriate sealant system that won’t break down under Miami Beach UV. After installation, every opening gets a water test before trim and interior finish goes back on, and we walk the site for debris and cleanup.
Miami Beach permitting is its own animal. HVHZ product approvals, NOA submittal packages, and coastal wind-zone review all have to be right the first time. We prepare the approval documents your permit application requires and coordinate with your contractor or building department as needed. Call (863) 656-0462 to schedule a site measurement and we’ll handle the documenting from there.
Frequently Asked Questions - Vinyl Impact Windows
Design pressure is matched per project to the Miami Beach wind zone, up to +/-100 PSF and never higher. The exact DP for your opening comes from the approved product configuration and your building’s elevation and exposure. Call (863) 656-0462 and we’ll tell you what applies at your address.
Vinyl impact window lead times run from four to nine weeks, depending on the line, size, finish, and glass configuration. Custom dimensions and specialty glass add time. We confirm lead time when we lock your final spec, and we coordinate installation around your delivery so the project doesn’t sit open.
Yes, in almost every case. Miami Beach reviews window and door permit applications under HVHZ rules, and the submittal needs the NOA or FL Product Approval number for the exact configuration you’re installing. We prepare that package with your permit application so the numbers on the drawings match the numbers on the product. Call (863) 656-0462 and we’ll walk you through what your project needs.
Within the approved size and design pressure limits for each series, yes. Mulled combinations, custom widths and heights, transom arrangements, and mixed operable and fixed configurations are all possible. Anything we propose will be supported by the approval documents your permit reviewer needs.
Vinyl frames need almost nothing beyond occasional washing with mild soap and water. There’s no paint to strip, no rust to remove, no pitting to polish. Keep the tracks free of sand and debris, especially if you’re close to the water in Miami Beach, and lubricate the roller assemblies per the manufacturer’s guide. That’s the entire maintenance program.
Get a Quote - Vinyl Impact Windows in Miami Beach
If you’re replacing windows anywhere in Miami Beach, from South Pointe to Surfside, start with a phone call. We’ll talk through your building, your style goals, and your budget, then schedule a free on-site measurement and provide a written line-item quote. No pressure, no vague allowances. Call Winslow Windows & Doors at (863) 656-0462 and let’s get your windows ordered.
Written by the team at Winslow Windows & Doors, serving Miami Beach, FL.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
