Awning Windows

Awning Windows in Miami Beach, FL | Winslow Windows & Doors

Awning windows are top-hinged, crank-out impact windows that let you keep fresh air moving through your home even when South Florida weather turns sideways. The sash opens outward from the bottom, which means rain slides off the glass instead of pooling on the sill. For Miami Beach homeowners, that combination of ventilation and weather protection is hard to beat during the humid months when you want airflow without letting a passing squall soak your floors. Winslow Windows & Doors installs impact-rated awning windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and we’ve been setting them level, plumb, and square in Miami Beach homes for years. Call (863) 656-0462 to talk through your project.

Call (863) 656-0462

Product Overview - Awning Windows

Awning windows have a distinct profile in hurricane-prone construction. Because they’re hinged at the top and crank outward, they create a natural awning effect that sheds rain while staying cracked open for ventilation. That’s a genuine advantage in Miami Beach, where afternoon thunderstorms roll through almost daily from June through September. You can leave an awning window open a few inches during a light rain and not worry about water running down the interior wall.

Architecturally, awning windows fit where tall or wide openings don’t make sense. You’ll see them placed above fixed windows, over kitchen sinks, in bathrooms, along hallways, and in any spot where you want light and air but don’t want a sash sliding in a track. They’re also a popular choice for second-story openings where reaching a crank is easier than wrestling a double-hung. The hardware is simple: a roto-gear crank that opens and closes the sash smoothly, with a seal that compresses tight when locked.

The units we install in Miami Beach are built on either aluminum or vinyl frames, depending on the line you choose. Aluminum gives you that slim, modern sightline and takes a powder-coat finish well. Vinyl offers thermal performance and a softer look that suits older Florida ranch and cottage styles. Either way, the glass is laminated impact glass with a PVB interlayer, engineered to stay in the frame under impact. That’s the difference between a window that breaks and a window that holds.

Call (863) 656-0462 and we’ll walk you through which frame material and configuration makes the most sense for your home.

Technical Specifications

Here’s what you’re working with on our impact awning window lines. These specs are reworded from manufacturer cut sheets, which we’re happy to share with you for your specific configuration.

• Frame materials: Aluminum or vinyl, depending on product line and aesthetic preference
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
• Finish options: White, almond, bronze, black, and tan
• Screen options: Fixed screen or retractable screen, mounted on the interior
• Operation: Top-hinged, crank-out roto-gear hardware with multi-point locking
• Design pressure: Matched to your Miami Beach wind zone, up to +/-100 PSF, never higher
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration

Every quote from Winslow Windows & Doors includes the exact NOA or FL Product Approval number tied to the configuration you’re buying. That’s the document your Miami Beach permit reviewer will ask for.

Hurricane & Compliance Performance

Awning windows for Miami Beach homes need to clear a high bar. Here’s how these units perform, feature by feature.

Laminated Impact Glass

Two panes of glass bonded to a PVB (polyvinyl butyral) interlayer. When debris hits, the glass cracks but the interlayer holds the broken pieces in the frame. No blowout, no flying shards, no open hole for wind to pressurize your home. That’s the core principle behind every hurricane window we install in Miami Beach.

Miami-Dade NOA / FL Product Approval

NOA stands for Notice of Acceptance, and it’s the gold standard for hurricane-rated products in Florida. Every awning window configuration we sell carries a Miami-Dade NOA or Florida Product Approval number, issued per configuration. You’ll see the exact number on your quote before you sign anything.

FBC / HVHZ Compliance

These windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ applies to Miami-Dade and Broward counties, and it’s stricter than the standard Florida Building Code. Your Miami Beach permit will reference it. These units are built for it.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under a specific protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. Awning windows in our impact series are tested under this protocol family, which is what qualifies them for use in Miami Beach’s wind zone.

Design Pressure Matched to Your Wind Zone

Design pressure is a PSF rating that measures how much wind pressure a window can withstand. Our awning windows are matched to your specific Miami Beach wind zone, up to +/-100 PSF, never higher. We don’t guess at this. Your home’s location, height, and exposure determine the required DP rating, and we verify it on every quote.

Energy Performance

Low-E and insulated glass options are available on every awning window line we carry. In Miami Beach, Low-E coatings cut solar heat gain through south- and west-facing openings, which keeps rooms from baking in the afternoon. It’s a practical upgrade, not a sales gimmick, and it’s worth considering for any window that catches direct sun.

Color & Glass Options

Awning windows don’t have to look like a standard white builder-grade unit. We order finishes and glass in combinations that fit the house they’re going into.

For finishes, white and almond cover the bulk of Miami Beach homes, especially mid-century ranches and condos with lighter stucco exteriors. Bronze and black read more contemporary and work well on modern builds or homes with dark trim. Tan is a quieter earth tone that disappears into beige and sand-colored facades. If you’re in a historic district or a Mediterranean-style home, almond and bronze tend to complement tile roofs and wrought-iron accents best.

Glass options change how the window performs day to day. Clear laminated impact glass gives you the truest view, which matters if the window faces the water. Tinted glass cuts glare and adds privacy without going full reflective. Low-E insulated glass adds a thermal break and blocks solar heat gain, which is worth considering for west-facing openings or rooms that run hot. We’ll help you pick the right glass for each opening based on orientation and how the room gets used.

Installation by Winslow Windows & Doors in Miami Beach

An awning window with a Miami-Dade NOA is only as good as the opening it’s set into. Improper installation can compromise the entire rating, and in an HVHZ jurisdiction like Miami Beach, that’s not a minor detail. That’s why we treat installation as its own craft.

Our process starts with a pre-install inspection. We measure the rough opening, check the condition of the buck, and verify the surrounding framing is sound. Then we set the window level, plumb, and square. No shims-as-afterthought, no caulking over gaps. The unit goes in the way the NOA assumes it will be installed.

We seal the perimeter with AAMA 812 low-expansion foam, which creates an air and water barrier without distorting the frame. Our installation practice follows AAMA 2400/2410 standards for window installation. After the window is secured and sealed, we run a water test and inspect the interior for any sign of intrusion. Then we clean up and leave the opening ready for finish work, interior trim, or paint.

Miami Beach brings its own considerations: coastal exposure means salt air and driving rain, wind zones vary block by block, and the city’s permitting process requires the right NOA documentation on the submittal. We’re familiar with what Miami Beach building officials need, and we’ll help you get it in front of them. If you’re pulling a permit, we’ll provide the approval numbers and product documentation your plans call for.

Frequently Asked Questions - Awning Windows

Get a Quote - Awning Windows in Miami Beach

If you’re pricing awning windows for a Miami Beach project, let’s get you a written quote with exact configs, NOA numbers, and lead times. We’ll schedule a free on-site measurement and walk you through frame, glass, and finish options for each opening. Call (863) 656-0462 now and we’ll get your project on the calendar.

Written by the team at Winslow Windows & Doors, serving Miami Beach, FL and surrounding coastal communities.