Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
PGTCGI
Before
After
Before
After
Before
AfterWhy Miami Beach Homeowners Choose Therma-Tru Windows & Doors
Winslow Windows & Doors provides independent Therma Tru in Miami Beach windows and doors service throughout the area, from South Beach Art Deco condos to single-family homes in Mid-Beach and North Beach. We’re not factory-backed, and we won’t pretend to be. What we bring instead is something Therma-Tru’s warranty line can’t: a local crew that has rebuilt Therma-Tru door slabs and frame corners in Miami Beach for years, knows exactly how salt air, humidity, and wind load stress these products, and fixes them right the first time. Ed Winslow grew up in Miami and has spent nearly three decades watching what this climate does to a poorly installed window or door. That’s the knowledge we put on your door. Call (863) 656-0462 for a free estimate on any Therma-Tru repair or replacement.
Why Trust Winslow Windows & Doors for Your Therma-Tru Windows & Doors?
We know the Classic-Craft, Smooth-Star, and Pulse line quirks inside out, without pretending to be factory-backed. Our techs understand why a Therma-Tru fiberglass slab swells in August and binds at the latch, why Benchmark roller tracks choke on Miami Beach sand, and why compression weatherstripping fails along the threshold after a few salt-heavy rainy seasons. This isn’t textbook stuff. It comes from pulling hundreds of Therma-Tru doors in Miami Beach’s unique barrier-island environment and learning what actually holds up. Ed’s years in the field, starting with fundamentals at Miami Dade College’s Building Construction Technology program, taught him that a door is only as good as the installation behind it. We bring that standard to every Therma-Tru job.
As an independent Therma-Tru service provider, we carry OEM weatherstripping, hinges, and multipoint lock components where available, because Therma-Tru’s profiles are proprietary and a generic substitute will leak or bind. When non-structural hardware like sweep seals or rollers can be upgraded to a marine-grade aftermarket equivalent that meets Miami-Dade specs, we’ll tell you why that’s the smarter call. You get the straight answer either way.
Common Therma-Tru Windows & Doors Problems We Fix in Miami Beach
- Warped or swollen Classic-Craft fiberglass door slabs. The Mahogany Collection looks stunning on an Ocean Drive lobby, but Miami Beach’s humidity soaks into the slab edges when bottom-rail seals fail, causing the door to stick and the deadbolt to misalign. We fix the root cause, not just the symptom.
- Failing compression weatherstripping on Classic-Craft doors. Salt air hardens the OEM compression seal faster here than in any inland market. Once it loses its memory, drafts and water intrusion start at the threshold. We replace with OEM profile-matched weatherstripping and re-adjust the door reveal.
- Sagging or derailed Benchmark sliding patio door rollers. Sand and salt grit from the beach accumulate in the track and destroy roller bearings within a few years. We pull the panel, clean and flush the track, replace rollers with corrosion-resistant components, and set the height correctly.
- Hairline cracks in Smooth-Star door skins. Impact debris or years of intense UV can crack the fiberglass skin. Once moisture reaches the foam core, the door loses its insulating value and can start to delaminate. We assess whether the panel can be repaired or must be replaced.
- Multipoint locks that won’t engage all three points. Thermal expansion in Miami Beach’s heat and humidity shifts slab alignment fractionally, and Therma-Tru multipoint systems are unforgiving. We strip and re-lubricate the gearbox, adjust the keepers, and reset the timing so all three points throw cleanly.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We use OEM Therma-Tru weatherstripping, hinges, and multipoint lock components when available because their profiles are proprietary. Off-brand weatherstripping looks close but never seats right, and you’ll feel the draft. For non-structural hardware like Benchmark rollers or sweep seals, we may use quality aftermarket equivalents that meet Miami-Dade specs, often with better corrosion resistance than the factory parts. Our repair-vs-replace rule is honest and consistent: we only replace an entire Therma-Tru door or window when the frame is rotted, the foam core is saturated, or the cost of rebuilding exceeds 60% of new. Otherwise we repair. Call (863) 656-0462 and we’ll tell you which side of that line your door falls on, with a written line-item quote to back it up.
Our Therma-Tru Service Process - Step by Step
- 1
Diagnosis. We inspect the slab, frame, hardware, weatherstripping, and threshold. For Benchmark sliders, we check roller wear, track condition, and panel alignment. We measure for Miami-Dade wind-zone compliance and check for salt corrosion around fasteners.
- 2
Repair or install. We source OEM Therma-Tru components, execute the repair or full-frame replacement, and handle any HOA or Miami Beach Historic Preservation Board paperwork when required. On full-frame replacements, we pull permits and schedule inspections.
- 3
Test. We cycle the door or window repeatedly, check all multipoint lock points, run water over the threshold, and confirm the panel sits square in the opening. Ed’s name is on every job we do. That keeps him honest.
- 4
Warranty. Every job is backed by the 36500-Day Done Right Promise: if it’s not done right, we make it right, period. We leave you with a written record of parts used, work performed, and warranty coverage.
Therma-Tru Products We Service & Install in Miami Beach
We service and install the full Therma-Tru residential lineup you’ll find in Miami Beach homes and condos: Classic-Craft Mahogany Collection fiberglass entry doors, Smooth-Star fiberglass entry doors, Pulse Series entry doors, and Benchmark by Therma-Tru sliding patio doors. We also offer Impact Windows solutions for complete home protection. We also handle Therma-Tru sidelights, transoms, and matching frame components. For brands like PGT, CGI, CWS, and ES Windows, we have the same level of local familiarity, but when it comes to Therma-Tru, the door hanging in your Miami Beach entryway is something we’ve likely rebuilt before.
We Also Service These Brands
Winslow Windows & Doors is not a single-brand shop. We’re authorized installers for PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux alongside Therma-Tru. If your Miami Therma Tru service needs extend beyond a single brand, one call covers all of it. We’ll give you an honest recommendation on which product belongs where.
FAQs - Therma-Tru Windows & Doors Service in Miami Beach
No. We’re an independent Therma-Tru service provider. We’re not factory-backed or part of Therma-Tru’s authorized dealer program. What we bring is Miami Beach-specific field experience with Therma-Tru products, OEM-compatible parts where they matter, and a repair approach that doesn’t push replacement when a rebuild will do. Call (863) 656-0462 and we’ll give you the straight answer on your door.
For weatherstripping, hinges, and multipoint lock components, we use OEM Therma-Tru parts because those profiles are proprietary and aftermarket versions don’t seal or seat correctly. For non-structural hardware like Benchmark rollers or sweep seals, we may use quality aftermarket equivalents that meet Miami-Dade specs. We’ll tell you exactly what’s going on your door and why.
Most Therma-Tru adjustments, weatherstripping replacements, and roller jobs are done in one visit. A full-frame replacement or a door slab rebuild in Therma-Tru Windows & Doors in North Bay Village, FL and surrounding areas can take two to three days, sometimes longer if Historic Preservation Board approval is required on a contributing Art Deco structure. We’ll give you a written timeline before work starts, and we keep it. Call (863) 656-0462 for an exact schedule.
Classic-Craft Mahogany Collection, Smooth-Star fiberglass entry doors, Pulse Series entry doors, and Benchmark by Therma-Tru sliding patio doors. We also service Therma-Tru sidelights, transoms, and frame components. If you have an older Therma-Tru product not listed here, call us and we’ll tell you honestly whether we can service it.
Replacing weatherstripping, adjusting multipoint locks, or swapping rollers on your Therma-Tru door doesn’t void the manufacturer’s warranty when the work is done correctly with the right parts. We use OEM components where required and document everything. If your door is still under Therma-Tru’s warranty period, we’ll help you understand what’s covered before any work begins.
Weatherstripping replacement on a Classic-Craft door typically runs $180 to $340. Roller replacement on a Benchmark slider runs $220 to $400. Multipoint lock rebuilds run $275 to $550. Full-frame Therma-Tru door replacement in Miami Beach runs $2,800 to $6,500 depending on size, glass package, and wind-zone requirements. Call (863) 656-0462 for an exact quote. Estimates are free.
Book Your Therma-Tru Service in Miami Beach, FL
Call (863) 656-0462 for a free estimate on any Therma-Tru repair, replacement, or full-frame install in Miami Beach. A live person answers, 24/7. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Miami Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.